0

Battery sprayers and electric sprayers are a fad today—and for a good reason. They are powerful, efficient, and convenient to use. But pump types are still here to stay. Why not? A pump sprayer is not only affordable but also still gets the job done.

In today’s post, we will discuss the benefits of a pump-based sprayer and how to use it for your indoor greenhouse. So, let’s check them out below!

Compact and Lightweight

One great advantage of the pump-type sprayer is most of them are designed to be portable and lightweight so that you can carry them anywhere. You will not need to think about the battery’s weight when moving the machine around, like many battery backpack sprayers. You can spray your plants at any time.

Cost-Efficient and Energy-Saving

If you’re keen on getting the job done without spending a lot of cash, then a hand-held pump sprayer will be your best choice. Compared to powered sprayer and electric sprayers, pressure pump sprayer is cheaper. Plus, they don’t operate on batteries, so you don’t need to use electricity to get it to work.

Easy to Maintain

In terms of machine maintenance, the pump type is less complicated and simple. You don’t need to think about changing the battery when it starts to malfunction or worry about getting an extension cord to plug and power the sprayer. Pumping the tool is all you need to do, so you can get on your spraying tasks then and there.

Convenient

A pump-based sprayer is also extremely convenient to use. Most of them are designed to have shoulder straps with thick pads and can be used as sling sprayers. Having this design functionality allows you to move around your plants and spray solutions when needed. The tool will not get in the way as you freely move around.

That being said, battery powered backpack sprayers can be very tricky when used in the greenhouse. It’s difficult to avoid hitting plants or pots when you turn around.

How to Properly Use the Pump-Based Sprayer

Using the tool is straightforward. The most important thing you need to make sure is you set the desired pressure for your spraying job before misting your plants. To guide you on how to use the tool, follow these steps:

  1. Wear protective clothing before even spraying your plants with fertilizers or insecticides. The things you need include gloves, long sleeves and pants, an eye protector, and a mask.
  2. Use the pressure valve of the sprayer to reduce air from the tank. If you don’t do this, you might be surprised with pressurized air when you open the tank’s lid.
  3. Mix the solutions well in the sprayer’s tank by following the instructions on the label.
  4. Once the tank is closed, it’s time to set your desired pressure for the sprayer. You can do this by pulling and pushing the handle on the top of the tank’s cover. Repeat this multiple times until it’s hard to push down.
  5. At this point, you can already start spraying. Use the trigger on the handle to release the liquid and adjust the nozzle to your desired misting volume.
  6. Spray your plants thoroughly. You’ll need to repump the sprayer if you are hydrating or treating many plants.
  7. Ensure to clean the sprayer every after use to prevent damage from chemical accumulation. Use mild soap and water to achieve excellent cleaning. Allow it to dry before using it again.
  8. Designate an area for the tool to be securely kept. Make sure pets and children will not be able to reach it.

The Takeaway

With the benefits stated above, it’s clear that pump sprayers are advantageous for greenhouses. It’s a cheap and cost-effective alternative to the battery powered garden sprayer and electric types.

Just make sure to get the tool from a reputable brand as they provide high-quality products. So, start choosing a sprayer now and take care of your greenhouse plants the way you want it!

6 Top Reasons To Dine At a Chinese Restaurant

Previous article

How Can You Customize the Interior of Your Car?

Next article

You may also like

Comments

Comments are closed.